download
Removal Procedure: 4.7L V8 OE Air Inlet System (a) Remove the two 10 mm cap nuts and throttle body cover (Fig. 4-1). (b) Remove air cleaner hose assembly. (1) Disconnect the vacuum hose and No. 2 ventilation hose (Fig. 4-2).
(2) Loosen the two 10 mm hose clamps and remove the air cleaner hose (Fig. 4-2). 5. Removal Procedure: 5.7L and 4.7L V8 OE Air Inlet System (a) Remove the air cleaner lid. (1) Disconnect the MAF sensor connector (Fig. 5-1).
(2) Using a clip remover, detach the wire harness clamp (Fig. 5-1). (3) Unfasten the 4 hook clamps and then
remove the air cleaner lid (Fig. 5-1). (b) Remove OE air filter and save. (c) Remove the two 10 mm bolts and air cleaner
case (Fig. 5-2)
Incoming search terms:
- 2007 toyota tundra alternator removal
- toyota camry 2007 air system
- step by step instructions on replacing alternator on 2008 toyota tundra
- remove the alternator 1999 tundra v8
- how to remove an alternator from a 2011 toyota tundra 5 7l engine
- how to install altenator 2008 tundra 5 7
- alternator 2010 tundra 4 0
- air conditioner fuse on 2007 toyota camry
- ac compressor fuse for toyota camry 2007 SE
- 2010 tundra alternator removal